PEAK-System Forum

Hello. I am having an issue transferring trace data over FTP.
Tracer is not running (I did not connect USB interface during FTP)
Does anyone know how to fix this issue?

$ ftp 10.1.0.151
Connected to 10.1.0.151.
421 Service not available, >>> tracer running <<<
ftp>

Ping to this IP seems OK
~ $ ping 10.1.0.151
PING 10.1.0.151 (10.1.0.151) 56(84) bytes of data.
64 bytes from 10.1.0.151: icmp_seq=1 ttl=255 time=0.480 ms
64 bytes from 10.1.0.151: icmp_seq=2 ttl=255 time=0.661 ms
64 bytes from 10.1.0.151: icmp_seq=3 ttl=255 time=0.679 ms
64 bytes from 10.1.0.151: icmp_seq=4 ttl=255 time=0.350 ms
64 bytes from 10.1.0.151: icmp_seq=5 ttl=255 time=0.295 ms
64 bytes from 10.1.0.151: icmp_seq=6 ttl=255 time=0.582 ms

Hello,

What's the status of the LEDs?

Also, i'll be moving this to the correct forum

BR

Marvin