Search found 403 matches

by M.Heidemann
Thu 25. Feb 2021, 12:15
Forum: PCAN-USB
Topic: Cannot send/receive messages to my CAN controller
Replies: 5
Views: 57

Re: Cannot send/receive messages to my CAN controller

Hello, Do you use any kind of USB-hub or USB-Extension? If you do, please use your PCAN-USB (IPEH-002022) directly on a USB-Port of your PC. Furthermore: We do know of modules that claim to use 125Kbit/s but are off by 2-3% resulting in the bitrate being more in the range of 123kbit/s for example, y...
by M.Heidemann
Wed 24. Feb 2021, 14:57
Forum: PCAN-RS-232
Topic: PCAN-RS-232 message filtering
Replies: 4
Views: 31

Re: PCAN-RS-232 message filtering

Hi; I think you misunderstand whats happening here, both ProcessMsgFromCan() and ProcessMsgFromSerial() are called with every cycle (one after another). You CAN excute something inside of ProcessTimer25msec() but you do not need to, you might as well get rid of the timer-diff comparison and the corr...
by M.Heidemann
Wed 24. Feb 2021, 08:27
Forum: PCAN-Explorer 5 & Add-ins
Topic: Symbol file format specification?
Replies: 1
Views: 23

Re: Symbol file format specification?

Hello, As you have posted this in the PCAN-Explorer 5 Forum, i assume you own a copy of PCAN-Explorer 5? The PCAN-Explorer 5 help contains a detailed description of symbol-files: under "Reference" -> "Symbol Files": Symbol-FilesHelpPE5.png Please let us know, if this is what you are looking for. Bes...
by M.Heidemann
Tue 23. Feb 2021, 16:00
Forum: PCAN-Router Pro FD
Topic: disable wakeup
Replies: 1
Views: 23

Re: disable wakeup

Hello, Can you tell us, which transceiver-modules you use in your PCAN-Router FD or do you use the default configuration? For the default configuration with 6 wake-up capable transceivers, the following applies: To disable Wake-Up for the PCAN-Router Pro FD completely, you stop supplying the device ...
by M.Heidemann
Tue 23. Feb 2021, 14:50
Forum: Linux
Topic: Trying to get Linux CAN driver working with a linear position sensor
Replies: 7
Views: 224

Re: Trying to get Linux CAN driver working with a linear position sensor

Hello, As far as i can see you do not have the "zero message" which apparently are status messages anywhere in your receive window, did this resolve the issue? As mentioned earlier you only get the message, if it is read. The message will be triggered once a channel is initialized. We cannot recomme...
by M.Heidemann
Mon 22. Feb 2021, 09:57
Forum: PCAN-USB
Topic: Cannot send/receive messages to my CAN controller
Replies: 5
Views: 57

Re: Cannot send/receive messages to my CAN controller

Hello, You may wanna check, if the PCAN-USB is working as intended by measuring the transceiver voltages, please see this forum post regarding this: https://forum.peak-system.com/viewtopic.php?f=120&t=52&p=133&hilit=defective#p133 Also you should try to see, if using a sample-point of 75% at the bit...
by M.Heidemann
Mon 22. Feb 2021, 07:32
Forum: PCAN-Basic
Topic: OSError: [WinError 126] The specified module could not be found
Replies: 1
Views: 55

Re: OSError: [WinError 126] The specified module could not be found

Hello, Is this error reproducable, if the PCANBasic API was installed using the PEAK-Device Driver Setup? Dowload Peak Device Driver Setup: https://www.peak-system.com/quick/DrvSetup Make sure to check the "PCANBasic" option during the setup: DriverSetupPcanBasic.PNG Please report back to us if this...
by M.Heidemann
Fri 19. Feb 2021, 10:47
Forum: PCAN-LIN
Topic: Receiving data from lin device using RS232
Replies: 17
Views: 668

Re: Receiving data from lin device using RS232

Hello, Please contact us via email: support[at]peak-system.com Make sure to give reference to your issue and also inlcude the attachments from this forum-post: LINLog12.txt NewProfile111.pclin Also please give us some info on how you transmit the LIN-frames shown in your logs, do you initiate them v...
by M.Heidemann
Wed 17. Feb 2021, 11:31
Forum: PCAN-Router Pro FD
Topic: Routing + Logging (+ Backup Battery) example?
Replies: 1
Views: 18

Re: Routing + Logging (+ Backup Battery) example?

Hello, Thank you for your request. Currently we do not offer a example combining the logger firmware and the regular routing firmware. But you can start with taking a look at the example "21_RTOS_FILESYSTEM" which shows how to acccess to the file system and how data can be written to it. This can be...
by M.Heidemann
Wed 17. Feb 2021, 11:13
Forum: Linux
Topic: Trying to get Linux CAN driver working with a linear position sensor
Replies: 7
Views: 224

Re: Trying to get Linux CAN driver working with a linear position sensor

Hello, Generally speaking you should always read until the buffer is empty. your data looks like you receice MSGTYPE_STATUS which does not include any real Messages (MSGTYPE_STATUS). You should check the message type, if you do not want to process status frames. /* * MSGTYPE bits of element MSGTYPE ...