PEAK-System Forum

Hallo,

hier die Antworten auf Ihre Fragen:
- nein, das ist so direkt leider nicht möglich. Dazu müsste die Symboldatei editiert werden, und dann neu eingeladen werden.
- Ja, der Multiplexer ist nur eine Option, aber nicht notwendig.

Gruß

Michael

Hi,

please provide the serial number (IPEH-XXXXXX yyyyyy) of the used PCAN-USB FD device, to see which hardware revision you are using.

regards

Michael

Hi,

AFAIK Matlab/Simulink only supports our CAN interfaces at the moment: https://de.mathworks.com/hardware-suppo ... ystem.html

So please contact Mathworks for your request, to check if they also support the PLIN interfaces in the future.

regards

Michael

Hi Falk,

could be an issue with the refresh rate in the panel. Refreshing of Panels could be controlled by the Panel Properties (right mouse click on the panel). A too high refresh rate could cause problems. In that case disable the automatic option and use a refresh rate of 10- 20Hz. When ...

Hello Falk,

thank you for the info. Does this happen only with version 6.8, or was it also with version 6.7? If you don't have the setup for 6.7 available anymore, please send an email with the your license ID to our support email address, to be able to send you the older setup.

regards

Michael

Hi,

no, this is not possible. The VBscript option only works with PLIN-View Pro, which is also based on the PLIN-API.
When you already work with the PLIN-API, you have full control over the hardware and schedulers by API.

regards

Michael

Hi,

at the moment only the PCANBasic dll files (32 and 64bit) will be copied with the PEAK-Driver package PeakOemDrv.exe. All other dlls files must be copied manually.

regards

Michael

Hi,

yes, when using a PCAN FD hardware, you can generate errors on the CAN with the API of the PCAN-Developer 4 package, as you can do with the PCAN-View Error Gernerator Tab.

regards

Michael

Hi,

no, it is no problem to use two PCAN-USBs on the same PC. Check your CAN cable again, and do the same test under Windows, just to be sure both devices are working correctly.
As a test you can also install our peak-linux-driver in chardev and pcanview, to test the communication under Linux ...

Hi,

please contact the developer of that tool. We don't know this tool and can't tell you the reason for this problems.

regards

Michael