Information about the PPCAN protocol

This forum covers third party software that is for example developed with our APIs
Post Reply
digital
Posts: 1
Joined: Mon 29. Oct 2018, 09:39

Information about the PPCAN protocol

Post by digital » Mon 29. Oct 2018, 09:52

Hello,

I use one of your PPCAN-MIOs (32bit) with a PCAN-USB adapter. I'm interested whether configurations transmitted from the PPCAN Editor 2 to the device can be stored and replayed (e.g. with a script). In the docs all information I found about the protocol was on p.12 of this: https://www.peak-system.com/produktcd/P ... an_eng.pdf

Is it possible to provide more information about the protocol or a way to store the configuration commands in a file?

Thanks for your help!

User avatar
M.Riedl
Software Development
Software Development
Posts: 21
Joined: Wed 22. Sep 2010, 13:28

Re: Information about the PPCAN protocol

Post by M.Riedl » Mon 29. Oct 2018, 12:37

Hello,

Recording and replaying the configuration transmission will be difficult because the PPCAN protcol is a point-to-point (handshake) protocol that communicates with only one CAN ID 7E7h.

There is no public documentation about the PPCAN protocol at the moment.
The PPCAN-Editor 2 do not have any command line options at the moment.

Regards
M.Riedl

Post Reply