PCAN driver 8.10.0 is installed.
Followed below link to install PCAN view
https://www.peak-system.com/produktcd/D ... harDev.txt
Sequence of commands:
If you want to use our PCAN-View for Linux example you need the GTK+2:
$ sudo apt-get install gtk+2.0
$ wget http://www.peak-system.com/cupd2/PCAN-V ... TK+.tar.gz
NOTICE - this download link will no longer available - ask for this file at email@example.com
$ tar -xzf PCAN-View-LINUX-GTK+.tar.gz
$ cd pcanview
$ make all
In file included from /usr/include/PCANBasic.h:32:0,
/usr/include/pcan.h:32:2: error: #error "double define for DWORD, WORD, BYTE found"
#error "double define for DWORD, WORD, BYTE found"
This information is deprecated (This document was written when driver version 7.14 was current - 2014).
Please follow the current instructions given on our Linux-support page (Scroll down to the PCAN-View section):
http://www.peak-system.com/fileadmin/me ... /index.htm
Please also make sure to install the latest PCAN-Linux driver 8.10.2:
http://www.peak-system.com/fileadmin/me ... 0.2.tar.gz
Thanks for your help.
I am using PCAN-Linux driver 8.10.0. Is it fine to continue with the existing version or i need to upgrade to 8.10.2?
Another doubt is i installed PCAN view as per the link shared by you. No want to know how i can launch this PCAN view tool.
We do recommend to use the latest driver available,
we actively fix any bugs and introduce new features
with each and every iteration of the driver.
you can launch pcanview just by calling:
Code: Select all