PCAN-USB Pro driver no longer working

High-speed USB 2.0 to CAN/LIN Interface
Post Reply
johncondren
Posts: 1
Joined: Thu 11. Oct 2012, 11:54

PCAN-USB Pro driver no longer working

Post by johncondren » Thu 11. Oct 2012, 12:15

The PCAN-USB Pro driver is no longer works.

I had not used the Peak PCAN-USB Pro hardware for sometime. It originally work.
When I tried to use the hardware yesterday, the PCAN-View could not see hardware.

I un-install the PCAN-USB Pro software and re-installed it.
The devices manager gives the device status "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)" for PCAN-USB Pro.
I am running Windows 7 Professional (64 - bit).

Has anyone had a similar problem?

Regards
John

M.Maidhof
Support
Support
Posts: 1296
Joined: Wed 22. Sep 2010, 14:00

Re: PCAN-USB Pro driver no longer working

Post by M.Maidhof » Thu 11. Oct 2012, 12:24

Hi,

can you please reinstall the driver, using the latest driver version from our support website:

http://www.peak-system.com/fileadmin/me ... sb-pro.zip

If this will not work, please contact us by email, to check your system (setup log files etc.).

regards

Michael

Post Reply