Hi,
In the post http://www.peak-system.com/forum/viewto ... 158&t=1057 I read that the gatways can be controlled from within an PC application. We are wondering is we could replace CAN card wit a gateway and if there are pro's and cons we should think about.
We have a linux system and like to talk to the gateway and use it as a "remote" CAN card.
Kind Regards,
Renee Teunissen
Using the GATEWAY as aternative for CAN card.
-
reneeteunissen
- Posts: 1
- Joined: Wed 20. Aug 2014, 10:39
-
S.Michaelsen
- Hardware Development
- Posts: 87
- Joined: Fri 10. Sep 2010, 13:11
Re: Using the GATEWAY as aternative for CAN card.
Hi,
you could only receive and send CAN messages via network sockets but you could not change the settings of the gateway. You'd have to configure it via the web interface.
Best Regards,
Stephan Michaelsen
you could only receive and send CAN messages via network sockets but you could not change the settings of the gateway. You'd have to configure it via the web interface.
Best Regards,
Stephan Michaelsen