Repeatedly transmit message

[malikl]

Hello,

I'm using PCAN-View version 4.1.1.463 and I have a problem with repeatedly transmitting messages.
I set a transmit message and I send it only once, however the message is send repeatedly as shown in the attached file. (picture of logic)

Please advise,

Lior Malik

[K.Wagner]

hello,

do you have another CAN participant connected to the same network as your PCAN-View? Note that if you are connected alone or with a wrong bitrate, sent messages will not be acknowledged and the CAN controller will keep trying to deliver them.