No UDP Traffic
Posted: Wed 28. Mar 2018, 01:23
I've got a benchtop test setup with two PCAN Ethernet Gateways connected via a ethernet hub to pass CAN data in a unidirectional setup. The units show green lights indicating a good connection but I don't see any UDP traffic on the network and thus no output CAN data. The CAN Bus traffic that I want to forward uses extended message ID's but even when I just sent a single cyclic message with a 11bit ID I was still not seeing any forwarded traffic. Hoping someone can clue me in on why I don't appear to be seeing any data being forwarded?
Sending Unit Status
Receiving Unit Status
Sending Unit Status
- Sending Status
- 3778_Status.PNG (99.5 KiB) Viewed 4968 times
- Receiving Status
- 3612_Status.PNG (98.45 KiB) Viewed 4968 times