Termination of IPEH-002021
Posted: Fri 31. Jan 2020, 09:04
Is the internal termination (serial number >200.00) to be made by soldering simple jumper or 120Ohm surface mount resitor? Thanks.
Hello,
We do not recommend using the internal termination for the PCAN-USB (IPEH-002021).
The likelyhood of running into an over-termination is pretty high in this configuration.
Also the warranty does not cover damages caused during the modification for internal termination.
In case you want to get more information about the internal termination, please send us an email: support[at]peak-system.com
Best Regards
Marvin