Search found 1331 matches

by U.Wilhelm
Wed 6. Jul 2022, 11:35
Forum: Linux
Topic: PCAN-USB receiving empty data
Replies: 3
Views: 229

Re: PCAN-USB receiving empty data

All looks OK - please us a Windows System, install driver incl. PCAN-View for Windows and connect to your network. Run PCAN-View with you Bitrate and check if you receive any frames. If not check Status line if you have errors (simply send one single CAN Frame to your bus to test if the Network Envi...
by U.Wilhelm
Wed 6. Jul 2022, 11:31
Forum: PCAN-Basic
Topic: Unknown CAN Message being transmitted by PCAN device
Replies: 1
Views: 9

Re: Unknown CAN Message being transmitted by PCAN device

Sorry, but without more information we could not help you. Please use the SysInfo Tool and scan your system.
Then send us the result of a full scan, including your sample code, to support[at]peak-system.com.
Please also add a schematic of your Network Setup (incl. Terminations etc.)
by U.Wilhelm
Wed 6. Jul 2022, 11:27
Forum: Virtual PCAN-Gateway
Topic: Zugriff aus PPCAN-Editor und Co
Replies: 1
Views: 11

Re: Zugriff aus PPCAN-Editor und Co

Das Virtual Gateway ist für den PC nichts anders als ein neuer Gerätetyp (statt USB, PCIe, ExpressCard...) Wenn Die Applikation diesen Gerätetyp unterstützt, also zur Auswahl stellt, dann kann die Software das auch verwenden. Ist die Software aber vor der Veröffentlichung des Virtuellen CAN Treibers...
by U.Wilhelm
Tue 5. Jul 2022, 12:36
Forum: PCAN-Explorer 6 & Add-ins
Topic: Trace Bus Load
Replies: 1
Views: 12

Re: Trace Bus Load

No, the Busload is no signal and so could not be used in any trace or plot etc.
by U.Wilhelm
Tue 5. Jul 2022, 12:35
Forum: PCAN-Router FD
Topic: Router overloaded?
Replies: 3
Views: 98

Re: Router overloaded?

Thank you for the Information - we recommend to use a switch instead a if/then/elsif ...
You also could change the compiler optimation (see make file), after you think your firmware is ready, to a higher level.
by U.Wilhelm
Thu 30. Jun 2022, 07:36
Forum: PCAN-Router FD
Topic: Router overloaded?
Replies: 3
Views: 98

Re: Router overloaded?

If you convert from CAN FD to a CAN2.0a/b Network, it is up to you to check if the CAN 2.0a/b Network could even handle the messageflow (Network Management) We could not do this for you, as we do not know what exact happend on both sides of your CAN Networks, which CAN Frames and which real Busload ...
by U.Wilhelm
Wed 29. Jun 2022, 09:54
Forum: PCAN-Router FD
Topic: Usage of second argument to the CAN_FilerAdd function
Replies: 2
Views: 35

Re: Usage of second argument to the CAN_FilerAdd function

The "extended" parameter is not yet implemented - so it does not care which value you use in the function. See can.h not used yet, 29 bit IDs received always //! @brief //! This function adds CAN-IDs to the filter. //! //! @param hBus handle for CAN bus, see CAN_BUS... //! @param extended not used y...
by U.Wilhelm
Wed 29. Jun 2022, 09:25
Forum: PCAN-Router FD
Topic: Flashjing PCAN return a wrong status Hardware
Replies: 1
Views: 37

Re: Flashjing PCAN return a wrong status Hardware

If you change make file / code samples etc. we are not able to do any support without having the complete, ready to compile, project. Please use the CPP sample project as template if you want to use the CPP extension. This sample ist tested and work fine! ..\Hardware\PCAN-Router_FD\Examples\14_CPLUS...
by U.Wilhelm
Wed 15. Jun 2022, 08:38
Forum: PCAN-Router
Topic: How to debug the code with Visual Studio Code
Replies: 1
Views: 150

Re: How to debug the code with Visual Studio Code

As your Firmware run on the module - you need a JTAG Debug Interface - Otherwise, how should the Debugger communicate with the Hardware :?: We do not offer for the older PCAN-Router offiziell support for Debugging. For the PCAN-Router FD and other new devices, there is also a official supported Debu...
by U.Wilhelm
Mon 13. Jun 2022, 08:43
Forum: Software
Topic: About PCAN-view software
Replies: 9
Views: 1368

Re: About PCAN-view software

Looks like you have no 2nd active node with the same Bitrate attached. Again here the absoluter basics for running a CAN Bus Termination must fit (120 Ohm on each end - in Sum ~60Ohm - simply measuure when Network ist down!) CAN always need 2 active CAN nodes - otherwise you could not send any frame...