Only one CAN Channel on Virtual PCAN-Gateway

CAN to LAN gateway in DIN rail plastic casing
Post Reply
swacker
Posts: 1
Joined: Thu 9. Mar 2023, 12:50

Only one CAN Channel on Virtual PCAN-Gateway

Post by swacker » Thu 9. Mar 2023, 13:04

Hi,

I have configured my PCAN Ethernet Gateway and Virtual PCAN Gateway for using both CAN channels. Therefore I added 4 routes (see attachments for more information). No matter what I do, there is only one CAN channel available in PCAN View. I have tried all sorts of combinations (TCP, UDP, different ports, ...). All 4 routes are "green" in the vitual PCAN-Gateway Configuration Tool and in the Web Gui of the Gateway.

Can anybody give me a hint what could be wrong here?

BR
Sebastian
Attachments
only one channel available instead of two
only one channel available instead of two
pcan_view.PNG (41.06 KiB) Viewed 3680 times
RoutesConfiguration.vpoi.txt
(3.54 KiB) Downloaded 2034 times
poi_config.ini
(5.24 KiB) Downloaded 2174 times

G.Lang
Support
Support
Posts: 174
Joined: Wed 22. Sep 2010, 14:58

Re: Only one CAN Channel on Virtual PCAN-Gateway

Post by G.Lang » Fri 10. Mar 2023, 08:55

We need additional infos, for doing this please download the SysInfo tool from the following URL:
https://www.peak-system.com/fileadmin/m ... ysInfo.zip

Usage: unpack the ZIP and start the *.EXE (no installation required), let the analysis run and avoid the "Quick-Scan" option, save the result as a XML file and send the XML file to "support@peak-system.com"

Post Reply