PCAN MicroMod Mix 2 - Analogue Voltage Range

[mdenton]

Great, that seems to have done the job!

I now also have access to Output7, many thanks.

[mdenton]

Possible bug/future feature?

Dout7 is not available within the Digital Function setup, only Dout 0.

[G.Lang]

Dear Matt,

strange, i my version 2.5.2.56 of the MicroMod configuration 2 software the Dout7 is available in the "Digital Function" window. Please take a look at the screenshot below:

dout7_triggered_via_din0_din1.jpg (254.96 KiB) Viewed 10792 times

When you set Din0 or Din1 to GND the LED goes on. Please send me your configuration file (*.mcf) to support@peak-system.com

regards
Gunther

[mdenton]

That is odd,

Mine definitely only has CAN and Dout0 available. Why does your only have CAN and Dout7, where is Dout0?

I have emailed you the file.

[G.Lang]

Hi,

that is not odd -> this is the difference between the tab "Function 0" and tab "Function 7". Please switch to the "Function 7" tab and you can also configure Dout7.

digital_functions.jpg (73.51 KiB) Viewed 10783 times

regards
Gunther

[mdenton]

Ahh I see,

I assumed that each function had access to all available digital outputs, and had not spotted you had a different tab selected. .