some question about PassThru and CANFD

[uaes_hhl]

Hi, hello, thank you very much for your reply. Can the passthru interface be able to set prescaler, tseg1and2, sync jump width, or is there a way to directly set the bit rate and sample point by passthru interface?

[K.Wagner]

Hello,

you can set the arbitration bitrate as a pair of BTR0/BTR1 values (WORD value) over the "BaudRate" parameter of the function PassThruConnect:
PassThruConnect(DeviceID, ProtocolID, Flags, BTR0BTR1, pChannelID).

[rr_iav]

Dear Mr. Wagner
I am also interested in using a CAN-FD enabled PassThru device (Peak PCI FD in my case).
How can I obtain the PT dll for this purpose?
Thanks for you assistance.
Best regards

[PEAK-Support]

please read this https://www.peak-system.com/forum/viewt ... 2881#p8546