PCAN-USB: Setting GPIO (Labview)

USB to CAN Interface
Post Reply
Anil8899
Posts: 1
Joined: Wed 6. Oct 2021, 07:48

PCAN-USB: Setting GPIO (Labview)

Post by Anil8899 » Mon 25. Oct 2021, 07:19

Hello ,

I am using PCAN_USB device to set the GPIO by sending CAN message,
problem is when I am sent message to set particular GPIO , but i am receiving other response ID in-between.
could you please guide me in avoid this problem .
Attachments
response received
response received
2021-10-25_10h45_47.png (29.97 KiB) Viewed 9071 times
Block diagram
Block diagram
2021-10-25_10h44_23.png (21.96 KiB) Viewed 9071 times
Top
User avatar
PEAK-Support
Sales & Support
Sales & Support
Posts: 1646
Joined: Fri 10. Sep 2010, 19:34

Re: PCAN_USB_

Post by PEAK-Support » Mon 25. Oct 2021, 08:12

Sorry - this is a problem in your environment / used module. We do not know what exact you are tlaking about (which GPIO, which ID...?!?)
We could not help you! Also we do not support LabView.
Simply try first with PCAN-View and see / check if the System works as you aspect - after that try it in LabView.
--------------------------------
PEAK-System Technik
Technical Support Team
support[at]peak-system.com
-------------------------------
Top
Post Reply

Return to “PCAN-USB”