Please correct J2534 problem

Pass-Thru API and connection of Pass-Thru software to PEAK CAN interfaces.
Post Reply
Qidi.Huang
Posts: 1
Joined: Wed 13. Mar 2019, 04:13

Please correct J2534 problem

Post by Qidi.Huang » Wed 13. Mar 2019, 04:27

Hello,
I've installed PCAN driver successfully, but every time I insert PCAN device into PC USB port and run RAFT v4.37.02 on my Windows 7, it reports failure of J2534, and I can't find a valid device to use. See screenshots in attachment.
Attachments
In the main window, no valid hardware device could be found.
In the main window, no valid hardware device could be found.
main_window.png (35.67 KiB) Viewed 5195 times
This pop-up window says program has a problem with J2534.
This pop-up window says program has a problem with J2534.
problem.png (10.93 KiB) Viewed 5195 times
Top
M.Maidhof
Support
Support
Posts: 1751
Joined: Wed 22. Sep 2010, 14:00

Re: Please correct J2534 problem

Post by M.Maidhof » Thu 14. Mar 2019, 10:03

Hi,

we don´t know your RAFT software tool, but it looks like it needs a J2534 PassThru interface. As a first step, please install the PassThru driver from our website, and configure it to your needs.

https://www.peak-system.com/fileadmin/m ... ssThru.zip

regards

Michael
Top
Post Reply

Return to “PCAN-PassThru API”