PEAK-System Forum

Hello,

I have an application with some data representing a 4 digit number that is transmitted in two separate CAN frames - 2 digits in one message, and 2 digits in another.

e.g.



FormatVersion=5.0 // Do not edit this line!
Title="Untitled"

{SENDRECEIVE}

[LAST_TWO]
ID=183h
Var=SECOND unsigned ...

Does the PCAN-USB adapter (IPEH-002021/IPEH-002022) support CANFD with PCAN-Explorer 6, or is different hardware needed? If not, is there a firmware update to the PCAN-USB to provide CANFD compatibility?

Sorry, forgot that bit:

P-CAN Explorer 5
5.4.1.898

When observing a particular CAN-ID in the receive transmit window, if a particular message is selected, it does not remain selected when additional messages are received, because the message list gets re-sorted upon each newly appearing message. This is very frustrating when attempting to observe a ...

Changing the connection to the virtual adapter appears to fix this issue. But deactivating the virtual adapter still shows the signal values.

I also noticed if I right click on a message, and select "Inspect Variables", the window does indeed show the signal values. How do I get this to show up by hovering over the data column?

Typically, when viewing a recorded trace with an active symbol file, hovering over the "data" column of the trace window shows the signal values. For some reason, J1939 traces don't always work this way for me.

In the first attached screenshot, I have a J1939 connection configured, with a trace ...

I just now realized I can do what I need by adjusting the "priority" and "source" values, and the ID updates as desired, while maintaining the appropriate PGN:

I am able to open the "edit message" window, but I am unable to edit the ID, only the data (notice the message ID and DLC are grayed out):

I have a J1939 transmit list that I add messages to. Once I create the message, and the symbol/PGN is applied, I cannot edit the message ID or DLC, only the data.

My application could have several different source addresses, so I would like to be able to change the source address dynamically. I ...