PEAK-System Forum

Hi,

please send us an email which include your PCAN-Explorers license ID and referr to this forum post.

Hi,

please send me which CAN commands you have transmitted to try to set the devices RTC, please use the info.peak@hms-networks.com as e-mail address and referr to this topic.

Hi,

please send an email to "info.peak@hms-networks.com" and refer to this topic.

Best regards
Gunther

We don´t know the "sysma tool" (a third party tool) and therefore we don´t tested our hardware with this software.
Furthermore it´s also not possible to test our devices with all CAN software on the market.
Please send us an email, referr to this forum thread and then we can at least check the used ...

Hi Martin,,

the devices serial defaultspeed is 57600 and the default CAN speed is 125kbit/s -> see manual.
default.png


As a first step please try to establish a serial communication, in the example below i use the freeware "Hterm"
rs232_default values.png


Please check the connection by ...

Hi,

what´s the PCAN-MiniDisplays firmware version?
Is this an original "PEAK example" or did you modified it?
Please send the complete project to "info@peak-system.com" and refere to this forum entry.

Thanks
Gunther

Hi,

no idea, what´s wrong on your side but your config is working@500k. Maybe you don´t have transferred the config correctly into the module, or you have selected a wrong baudrate or your are using filters.

See here: viewtopic.php?f=59&t=7303#p18245


BTW: PEAK can´t guarantee the proper working, if it will work -> fine, if not -> bad luck and try a VM instead.

Dear Henrik,

do you use an own firmware or the routers standard logger firmware? If you use the standard firmware than, generally you can choose between 3 options to power down the device., please take a look inside the config.txt ...

Hi,

if you are using the kernel integrated netdev driver (SocketCAN) and you use a kernel 6.3 or higher then you can fix the canX names via the following instructions :
https://www.peak-system.com/fileadmin/media/linux/index.htm


canX_naming_kernel_6_3.jpg



If you use our proprietary netdev ...